Unsolved
4 Posts
0
2436
BIOS can't readt HDD boot sequence
Dear Team,
Kindly please support and help me,
i have DELL EMC Poweredge T40 with , starting from yesterday i have tried to install windows server in this server, but still failed.
The problem are :
1.After windows have copying the windows installation file to HDD, and reboot, DELL couldn't detect the HDD, and "have BIOS error in display "No bootable device found
2. In BIOS "Drives", HDD Detected in SATA-0, SATA Operation set to "ÄHCI" , Boot List Option set to "UEFI" and Secure Boot status "Disabled"
Please help me, why the bios still cannot boot from HDD
ciehells
2 Posts
0
April 6th, 2020 01:00
Your problem is hard to distinguish.
What happens if you temporary remove the BIOS. Maybe there is another problem?
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
April 9th, 2020 00:00
Hello @ciehells,
First of all, you need to make sure you are following this procedure to install the OS: How to install the operating system on a Dell PowerEdge Server? (OS deployment)
Then you should make sure in the BIOS Boot Settings: F2 during boot, then System Bios Settings / Bios Settings / Boot Option Settings / Boot Sequence and make sure the Hard Drive is the first on the list.
Regards.