This post is more than 5 years old
10 Posts
0
2271
Dell M610 Blade.. Disk failure on RAID1, replacement drive 0:0:0 still showing offline
My understanding was that the replacement drive should have come up as ready.... not sure where to go.
Controller SAS 6/iR Integrated (Embedded)
ID : 0:0:0
Status : Critical
Name : Physical Disk 0:0:0
State : Offline
Power Status : Not Applicable
Bus Protocol : SAS
Media : HDD
Device Life Remaining : Not Applicable
Failure Predicted : No
Revision : 5701
Driver Version : Not Applicable
Device Life Status : Not Applicable
Model Number : Not Applicable
Certified : Not Applicable
Encryption Capable : No
Encrypted : Not Applicable
Progress : Not Applicable
Mirror Set ID : Not Applicable
Capacity : 136.88 GB (146968412160 bytes)
Used RAID Disk Space : 136.23 GB (146278862848 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare : No
Vendor ID : FUJITSU
Product ID : MBE2147RC
Serial No. : D310PB600R7Y
Part Number : Not Available
Negotiated Speed : 3.00 Gbps
Capable Speed : 3.00 Gbps
Device Write Cache : Not Applicable
Manufacture Day : Not Available
Manufacture Week : Not Available
Manufacture Year : Not Available
SAS Address : 500000E1180B1492
ID : 0:0:1
Status : Ok
Name : Physical Disk 0:0:1
State : Online
Power Status : Not Applicable
Bus Protocol : SAS
Media : HDD
Device Life Remaining : Not Applicable
Failure Predicted : No
Revision : D906
Driver Version : Not Applicable
Device Life Status : Not Applicable
Model Number : Not Applicable
Certified : Not Applicable
Encryption Capable : No
Encrypted : Not Applicable
Progress : Not Applicable
Mirror Set ID : Not Applicable
Capacity : 136.63 GB (146699976704 bytes)
Used RAID Disk Space : 136.23 GB (146278862848 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare : No
Vendor ID : FUJITSU
Product ID : MBE2147RC
Serial No. : D304PB70DD5M
Part Number : PH0W328K7557117EC0WJA01
Negotiated Speed : 3.00 Gbps
Capable Speed : 3.00 Gbps
Device Write Cache : Not Applicable
Manufacture Day : 05
Manufacture Week : 29
Manufacture Year : 2011
SAS Address : 500000E1180F8D32
houlihas
10 Posts
0
June 27th, 2016 09:00
Rebooted into the Perc 6/iR controller BIOS, and realized this is an entirely different RAID BIOS, with pretty much the only option available being to "Resynchronize". Which after selecting that, the resync complete successfully an hour later and everything was OK.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 22nd, 2016 15:00
Hello.
Attempt entering into the controller BIOS using Ctrl +R utility during POST and force the Physical Disk 0:0:0 online under Physical Disk management and pressing F2 for options.
Let me know what you see afterwards.
houlihas
10 Posts
0
June 22nd, 2016 16:00
OK, this server is production, so arrangements were made today to reboot this weekend. Will post results after..
Thanks