Unsolved
1 Message
0
17002
Dell PowerEdge R630 nvme disks
Hello everyone,
I have a PowerEdge R630 server and need to connect nvme disks to it. Are there any original adapters I can use to do this?
Unsolved
1 Message
0
17002
Hello everyone,
I have a PowerEdge R630 server and need to connect nvme disks to it. Are there any original adapters I can use to do this?
Top
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
June 9th, 2021 07:00
If you have 10 X 2.5 backplane config you can use 4 NVMe drives on it provided you have an extender card connected to the PCIe slot which is connected to the backplane with a specific cable. "GY1TD" is the part# of extender card. Refer this Link for details
Another option is to have NVMe HHHL card on PCIe Slot. Refer Link for supported slot and number of cards (Refer NVMe PCIe SSD line item) for HHHL card.
Below are part# of HHHL card supported in R630
K2JF1 - CRD,NVME,3.2,HHHL,PM1725B
P1J3W - CRD,NVME,750GB,HHHL,P4800X
WD66N - CRD,NVME,375GB,HHHL,P4800X
335Y0 - CRD,NVME,6.4,HHHL,PM1735
78RG7 - CRD,NVME,1.6,HHHL,PM1725B
2H9FJ - CRD,NVME,6.4,HHHL,PM1725B
3GFMW - CRD,NVME,1.6,HHHL,PM1735
hendranata
2 Intern
2 Intern
•
134 Posts
0
August 16th, 2021 20:00
if we have dell r630 with 8 bay 2.5".. could we utilize nvme in front bay?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
August 16th, 2021 21:00
No. R630 8X2.5 backplane does not support NVMe drives. Only 10X2.5 backplane ofR630 support NVMe drives
Dell-Martin S
Moderator
Moderator
•
3.3K Posts
0
August 16th, 2021 21:00
Hi,
Shine is correct did you have any further questions?
regards Martin
hendranata
2 Intern
2 Intern
•
134 Posts
0
August 18th, 2021 01:00
using this cable: GY1TD
it seems there is 4 connector for backplane.. and the other side 4 connector for raid hardware or S130 ? which one?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
August 18th, 2021 02:00
hendranata
2 Intern
2 Intern
•
134 Posts
0
January 3rd, 2022 07:00
Can u show how cable K9TVP connected to dell r630 10bay please.. those cable contain 4 mini hd sas.. 4 port connected to GY1TD. So how about the other side? 4 port connected to backplane?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
January 3rd, 2022 08:00
4 port will get connected to the NVMe ports on the X10 backplane. It will be marked as Port A, B, C and D on the backplane. Refer below picture
hendranata
2 Intern
2 Intern
•
134 Posts
0
January 11th, 2022 19:00
i see.. thanks ur info
also 4 nvme drive,, which slot number that support nvme?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
January 11th, 2022 20:00
I believe it is last 4 hard drive slots where NVMe drives are supported?
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
January 11th, 2022 21:00
Hi, hendranata. Happy 2022 to you. Please see the attached.
6-9, 4 slots are resolved.
1 Attachment
9a1a328e-16b3-42f2-b77b-e52a3ba0ce0f-314822366.png
hendranata
2 Intern
2 Intern
•
134 Posts
0
January 12th, 2022 02:00
okay
when we use GY1TD adaptor nvme..
do we need to remove PERC H730? or can we use both controller?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
January 12th, 2022 05:00
H730 is required to manage SAS/SATA drives on the backplane. GY1TD is used to connect NVMe drives to the system.
DELL-Marco B
Moderator
Moderator
•
3.5K Posts
0
January 12th, 2022 05:00
Hello,
no you still use PERC H730 as controller. GY1TD is not a controller, but a SSD extender card.
Thanks
Marco
hendranata
2 Intern
2 Intern
•
134 Posts
0
January 12th, 2022 06:00
yes ssd nvme detected right now.. but the front bay led is blinking yellow.. does it normal?
i have tried install os and check the nvme ssd perfromance. surprisingly i only got around 1GB/s.
meanwhile if we take out the ssd nvme drive, and put back.. the nvme performance is drop to around 500MB/s.. so i have to reboot the server then writing speed back to 1GB/s