2 Posts
0
5667
Dell PowerEdge T130 with Perc H330 cannot see disks
I have a new Dell PowerEdge T130 with Perc H330. I have 3 1TB SATA drives in it, BIOS can see the disks on boot, See screen shot, And I have changed BIOS to RAID but when I enter RAID setup I can only see ther CD/DVD Drive and no disks, Any ideas? I believe we are using the latest FW.RAID
BIOS
BIOS RAID
Dell-DylanJ
2.9K Posts
1
December 13th, 2018 07:00
Hello,
I re-read your reply, and I believe I found the issue. In your subject, you mention using the H330, but the pciture shows the S130. Enabling RAID mode in the BIOS activates the PERC S130, which may be interfering with the H330. What I would do is toggle RAID mode off and go back to AHCI mode. Then, depending on if you're in UEFI or BIOS boot mode, watch for the Control + R option to access the H330 configuration utility, or go into F2 and then the Device Settings menu to select the H330, and you can check on your storage from within there.
jhumphries1509
2 Posts
0
December 14th, 2018 02:00
Perfect thanks :)
I didnt notice that, all sorted now