Unsolved
This post is more than 5 years old
2 Posts
0
19743
December 2nd, 2015 05:00
E1810 Error On Drive 3 - Poweredge T610
I have using 6 HDDs in my My PE T610 server. Windows server 2008 64 bit.
Two days back I received Error display E1810 Error On Disk2 . and i have replaced with new Disk still displaying the same E1810. I have read some articles in dell support i understood that can manage the RAID and rebuild the storage by Dell openmanage server administrator.
I started to install Dell OMSA, selected custom installation there under future selection having only server administrator web server. No any other future like server instrumentation and/or storage management.
Kindly advice for OSMA installation and Reconfiguration Disk.
Thanks in advance.
No Events found!
DELL-Chris H
7 Practitioner
•
9.7K Posts
•
48K Points
0
December 2nd, 2015 13:00
Vinu Vins,
I would recommend fully installing OMSA, including Storage. This will allow us to see the hard drives status. Are you aware if the replacement drive started to rebuild to the Virtual Disk when you inserted it? If not then that is likely the reason that the E1810 remained. Also with OMSA installed we can verify if the HDD's are possibly listed as Predicted Failures or not.
Let me know what you see.
vinu vins
2 Posts
0
December 2nd, 2015 21:00
I have Replaced with new Hard drive, but the error E1810 appearing in the display. and the HDD blinking orange LED.
Also tried to install OMSA, Unfortunately Storage management feature is not showing the under custom feature selection screen during installing OMSA.
Please see the screenshot
Please advice me
Thanks in advance.
theflash1932
11 Legend
•
16.3K Posts
0
December 4th, 2015 10:00
What file are you using to install OMSA?