This post is more than 5 years old
1 Message
0
128030
Expanding RAID 10 on Dell R730 with Perc h730P
Hello all,
We are attempting to expand a RAID 10 array on a Dell R730 rack server with a Perc h730P controller. We currently have 6, 600GB SAS drives in the RAID 10 array. When he click on the drives to perform an action it really gives us only Assign Global Hot Spare. There is no option to "Reconfigure task" on the virtual drive to increase the array to include the 2 new drives. I am unsure how to proceed. This is a recently purchased server in the last year. We are using OpenMange Server Administrator to try and perform this. Reading through some of the forums it appears that we should see a "Reconfigure Tasks" on the virtual drive pull-down but we do not.
Thanks
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
October 4th, 2015 11:00
You cannot reconfigure a nested RAID array (RAID 10, 50, and 60).
You would need to backup, create new array, restore.
AndrewDuey
3 Posts
7
August 23rd, 2017 13:00
You CAN (now) expand a RAID 10 array!
So . . . I know this topic has been here for a while but it appears something has changed and now you can expand a RAID 10 array on a Perc h730 controller per Dell.
I was looking to add 4 more hard drives to my existing RAID 10 array (of 4 drives) and noticed the reconfigure option was available and it looked like it would work (it let me select the disks). I called Dell support and they said that it would work and sent me this link (see page 30): http://topics-cdn.dell.com/pdf/poweredge-rc-h730p_user's%20guide_en-us.pdf
I am running: PowerEdge R730 w/ Perc H730p mini, Openmanage 8.3.0, Perc firmware 25.4.1.0004.
I hope this helps someone else who's been looking to expand their RAID 10 array.
Dim2on
1 Message
0
May 7th, 2018 09:00
Hi,
sadly for me there is no option like expand or rebuild :( willing to add 2 more HDD (6+2)
I'm running Dell R530 with PERC H730 mini, latest PERC firmware 25.5.4.0006 and latest bios 2.7.1
iDRAC 2.52.52.52
any ideas?
SCHLee
1 Message
0
June 22nd, 2018 13:00
I believe you have to go through the configuration at boot-up. You can't do it through iDRAC while the RAID array is in use.
nickelob
1 Rookie
1 Rookie
•
42 Posts
0
July 3rd, 2018 12:00
I believe you need to have the controller selected, not the actual VD.. sounds strange, but I'm fairly positive here. The server does not care if the array is in use or not- and you may experience slightly reduced performance while the job is running.
But why am I here? ....I just wish this could be done on an H700 right now.. I just replaced 6x 120GB kingston SSDs with 1TB 850 EVOs to avoid having to backup and re-image an ESXI host... but here I am, reading forums after there is no option to expand, etc. so I'm chalking it up to "one of those odd nested RAID things" because it is a RAID10.. and I've still got just 333GB usable, I bet I can reboot and create another disk- but I want to get LSI MSM to work because it can usually do more than OMSA on these older controllers.
maustg
1 Message
0
November 15th, 2018 05:00
Confirmed, it must be done from the console.
SydC
5 Posts
0
February 5th, 2019 05:00
I have the same RAID controller Running 4 disks in RAID 10 configuration on a 730x with H730P controller
I also am running ESXI 6.0 - will i be able to add the 2 additional disks via BIOS? or can I use OMSA?
Appreciate any guidance on the above
lbales1980
1 Rookie
1 Rookie
•
5 Posts
1
September 12th, 2019 13:00
Did you ever get an answer to this? I have a R730 with a PERC H730p mini and four SATA SSDs and needed a performance boost so bought four more drives after seeing the ability to now do an OCE for a RAID 10... however I see none of the options...
bseklecki_ge
1 Rookie
1 Rookie
•
10 Posts
0
May 17th, 2022 03:00
Any have an updated link?
Dell-Martin S
Moderator
Moderator
•
3.3K Posts
0
May 17th, 2022 06:00
Hi,
here you have the requested link: https://dell.to/3leLhkZ
Did you have any other questions?
Regards Martin
Will_Dell2024
1 Rookie
1 Rookie
•
3 Posts
0
August 7th, 2024 20:11
@AndrewDuey Hi nice to grete you, I have the same issue using PowerEdge R630, PERC H730P Mini and I cannot solve.
Could you help me?
I cannot open the link: http://topics-cdn.dell.com/pdf/poweredge-rc-h730p_user's%20guide_en-us.pdf .
Best regards
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
August 8th, 2024 09:07
Hello, Will_Dell2024
May we ask you to describe issue you are facing in detail so that we can see if there's anything we can do for you troubleshooting wise?
Respectfully,
Will_Dell2024
1 Rookie
1 Rookie
•
3 Posts
0
August 8th, 2024 19:34
Hi @DELL-Young E , thanks for you fast replay.
I configured RAID 10 en PowerEdge R630, PERC H730P Mini with 4 disks.
After I am trying to add 2 more disks, however There is no option to "Reconfigure Virtual Disks" on the Virtual Disk Management in RAID 10.
After I recreated new virtual disk using RAID 6 with 4 disks, now I can see the option add more disks.
So, I supuse en RAID 10 I cannot add more disks in virtual disk and RAID 6 I can add. Do you know the reasons?
Best regards
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
August 8th, 2024 19:52
Will_Dell2024
1 Rookie
1 Rookie
•
3 Posts
0
August 9th, 2024 17:50
Hi @DELL-Chris H, thanks for you help, however in the RAID 10 I GUI cannot show the option Reconfigure Virtual Disks.
I am using the following version BIOS, iDrac, and the H730p.
BIOS: 2.19.0
iDrac: 2.86.86,86
Best regars