This post is more than 5 years old
1 Rookie
•
32 Posts
0
5216
May 29th, 2015 08:00
H710P, configure via OpenManage?
We have a T620 server with H710P SAS RAID controller. On our 610 we could add hot spares via IDRAQ, don't seem to be able to do that with the 620. If I install OpenManage (we are running ESXi 5.5 on the system) would I be able to hot plug a spare and configure it (via OpenManage, not BIOS)?
Thank you,
Lou
No Events found!
DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.2K Points
0
May 29th, 2015 12:00
Hi Lou,
Yes, if you install openmanage server administrator you will be able to configure a hotspare.
http://www.dell.com/support/contents/us/en/19/article/Product-Support/Self-support-Knowledgebase/enterprise-resource-center/Enterprise-Tools/OMSA
http://en.community.dell.com/techcenter/systems-management/w/wiki/1760
Page 170 http://topics-cdn.dell.com/pdf/dell-opnmang-srvr-admin-v8.1_User's%20Guide3_en-us.pdf
louyo
1 Rookie
•
32 Posts
0
May 29th, 2015 13:00
Thank you very much, I will do so tomorrow.
Lou