Monitor temperatures hard drives PERC H755 Adapter?

Hi, if the temperatures are not displayed, make sure that the hard drives are supported and that the temperature sensors are properly functioning. 

• To check the status of all physical disks on a system, run this command:

omreport storage pdisk controller=0

• To check the temperature of a specific physical disk on a system, run this command:

omreport storage pdisk controller=0 pdisk=0

Replace “0” with the appropriate controller and physical disk number

Command List of OpenManage Server Administrator (OMSA) | Dell UK

Hello,

thank you for your reply. I have this same problem on all servers

PowerEdge R350
PowerEdge R540
PowerEdge R550
PowerEdge R630

Here is the output from

omreport storage pdisk controller=0 pdisk=0:1:0

but it doesn't display the temperature.

screenshot

Hello, shall we try the

"Perccli" here:

https://dell.to/3UF3ZCW

Hello,

Perccli works fine, but is there any way to set a temperature alert limit for the disks?

Thank you,
MB

Hello, PERCCLI tool does not have the ability to set temperature alert limits for individual hard drives connected to the PERC H755 Adapter. At least I couldn't find a way to do it. https://dell.to/3GOOV04 PERCCLI is mainly used for configuring and managing Dell PERC RAID controllers, but it lacks the ability to control temperature settings for individual hard drives. 

I was looking OMSA if set alert actions for individual disks. I didn't find it but I faced this article https://dell.to/3KEePEV

Hello,

thanks for your reply but this article is only for linux, but I am using windows server 2022.

Thank you,
MB