3 Posts
0
537
Needed parts to swap an PERC H740P to a HBA330/HBA330+ on a R740xd?
Can you help me identify the parts needed to swap a PERC H740P adapter to a HBA330/HBA330+ adapter on a R740xd server that has a 24-drive backplane? I believe the HBA330 will be needed, along with the HBA to 24-drive backplane cabling.
Thank you!
DELL-Joey C
Moderator
Moderator
•
3.4K Posts
0
October 4th, 2022 01:00
Hi @JimmyM3,
If you're using a H730P PCIe adapter (12Gb/s SAS), the cables that are used are the same as the cables for HBA330. For DPN on HBA330 adapter that would be 99T5J (HBA330+). Assumingly you're using PCIe adapter, following the diagram page 152 Figure 148 https://dell.to/3yB6tZB
JimmyM3
3 Posts
0
October 11th, 2022 13:00
This is actually a H740P adapter. Does that change anything?
DELL-Joey C
Moderator
Moderator
•
3.4K Posts
0
October 11th, 2022 19:00
Hi @JimmyM3,
Nothing's changed. 405-AAOD, DPN# 1M71J is a PERC H740P Adapter 12Gb/s SAS, PCI-E 3.0 card.
JimmyM3
3 Posts
0
October 12th, 2022 09:00
Thanks for the help and confirmation Joey!