This post is more than 5 years old
2 Posts
0
25005
Perc 6/i driver 2.24.0.64 PowerEdge 2900 running Windows Server 2008 (64-bit)
Does anyone know where I can find the Perc 6/i driver 2.24.0.64 for a PowerEdge 2900 running Windows Server 2008 (64-bit)? It's not part of the latest firmware package and I'm getting an error on OpenManage Admin that I need to upgrade to it. Any help would be great. Thanks,
Jeff
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
May 6th, 2015 22:00
http://downloads.dell.com/FOLDER89865M/6/DELL_MULTI-DEVICE_A03_R210510.exe
jt608
2 Posts
1
May 7th, 2015 10:00
Thank you. I ended up finding this one that works as well...
Dell PERC 5 and PERC 6 Controller
Device Driver for Windows Server 2008 x64
Version: 2.24.0.64
ftp.us.dell.com/.../raid_drvr_win_r210510.exe ;
ftp.us.dell.com/.../r210510.txt ;
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
May 7th, 2015 11:00
RAID_DRVR_WIN_R210510.EXE is an Update Package for Microsoft Windows, which will only run inside of a Windows environment (not pre-install environment). (Although technically you can extract the contents from this driver using the /extract switch).
R210510.TXT is only the release notes for the driver.
You will need the Hard Drive version (ZPE) to assist with installing the OS.