so you should be seeing the screen below, then you just hit Enter, which will bring up another screen, hit the down arrow once and highlight RAID properties, then hit Enter on that. Then you can create a Raid 0 or Raid 1 or View the Existing Array.
I would update the firmware on this device; it is showing to be out of date. Please download from this page: http://www.dell.com/support/troubleshooting/us/en/19/Product/poweredge-t310
Select your operating system, then go down to SAS RAID. Select the S300-S100 download, 2.0.0.0162
Watch your boot sequence, and look for the SaS device to be listed, then press Cntrl-C when prompted. This should show up before the Cntrl-R option. What I think you have is a SaS 6iR in your system, and othe only thing attached to your Perc S100 is the dvd drive. let us know.
DELL-Rey G
3 Apprentice
3 Apprentice
•
943 Posts
2
March 7th, 2013 13:00
so you should be seeing the screen below, then you just hit Enter, which will bring up another screen, hit the down arrow once and highlight RAID properties, then hit Enter on that. Then you can create a Raid 0 or Raid 1 or View the Existing Array.
DELL-Geoff P
990 Posts
0
March 5th, 2013 07:00
I would update the firmware on this device; it is showing to be out of date. Please download from this page: http://www.dell.com/support/troubleshooting/us/en/19/Product/poweredge-t310
Select your operating system, then go down to SAS RAID. Select the S300-S100 download, 2.0.0.0162
Update and then check the status again
Regards,
salsabeel
4 Posts
0
March 6th, 2013 03:00
i updated the firmware but still have same problem
DELL-Rey G
3 Apprentice
3 Apprentice
•
943 Posts
0
March 6th, 2013 13:00
Watch your boot sequence, and look for the SaS device to be listed, then press Cntrl-C when prompted. This should show up before the Cntrl-R option. What I think you have is a SaS 6iR in your system, and othe only thing attached to your Perc S100 is the dvd drive. let us know.
salsabeel
4 Posts
0
March 7th, 2013 03:00
yes i have sas 6/IR and dvd drive is the only thing attached to perc s100
but SAS 6 config utility has only two options adapter list and global properties
DELL-Geoff P
990 Posts
0
March 7th, 2013 19:00
Thanks Rey G for the screen shot!
salsabeel
4 Posts
0
March 10th, 2013 01:00
thanks for your help
Josephsosialvps
8 Posts
0
October 17th, 2022 02:00
please give me a tutorial to get into this setting, I'm still new
Dell-Martin S
Moderator
Moderator
•
3.3K Posts
0
October 17th, 2022 06:00
Hi,
here you could find the Guides for the Perc S100
https://dell.to/3MDJfrd
If you have any other RAID controller we have manuals for all our RAID Controllers online.
Did you have any other questions?
Regards Martin