Unsolved
This post is more than 5 years old
6 Posts
0
58213
PowerEdge 2650, PERC 3DI Drivers?
I am in the processing of setting up the PowerEdge 2650 server and wanted to install the Dell OpenManage Server Administrator, and noticed that the Storage Management option is not available. When looking at the information, it states that I have an incompatible version of the PERC 3Di driver and need 2.8.0.6076. Looking at the Dell site, I could not find this version so I installed the latest one 2.8.0.7xxx. But it is still not installing. Has anyone else run into this problem or know where I can find 2.8.0.6076 version of the driver? Thanks.
mma_mmc
6 Posts
0
October 26th, 2004 19:00
DELL-John K.
245 Posts
0
October 26th, 2004 19:00
DELL-John K.
245 Posts
0
October 26th, 2004 21:00
The following is a link to the latest driver and firmware for the PERC3-Di.
Drive-firmware Perc3-Di, Windows 2003
mma_mmc
6 Posts
0
October 26th, 2004 21:00
DELL-John K.
245 Posts
0
October 27th, 2004 17:00
mma_mmc
6 Posts
0
October 27th, 2004 17:00
DELL-John K.
245 Posts
0
October 27th, 2004 18:00
Below is a link to the latest version of Array manager. Uninstall the array manager that is on the server now-it is probably version 3.5. This link is to 3.6 - load this latest version. I think what is happening is that the firmware/driver version (2.8) is newer than the Array Manager version (3.5)
Array Manager 3.6
mma_mmc
6 Posts
0
October 27th, 2004 20:00
mianosm
1 Message
0
May 16th, 2008 20:00
Is there any possible way to update the PERC 3/di drivers on an Ubuntu 8.04 system
I'm currently using a PE2640 with BIOS version A21 (Successfully updated through linux.dell.com).
Thank you in advance.