This post is more than 5 years old
15 Posts
0
6509
Poweredge 840 / Drive replaced via openmanage...not coming online
I had one of the drives showing errors. I Used OM to take offline...and replaced.
I then tried selecting 'Online' and 'Rebuild'...but either unsuccessful.
Currently...new drive, top LED is blinking...and second LED in ON.
Status in Open Manage is 'Offline'.
Do I simply need to give it more time?
Note: Original was 250GB...new is 320GB. OM stats do read accurate.
Physical Disk 0:0:2 | Offline | No | SATA | 232.25GB | 232.25GB | 0.00GB | No | DELL | WDC WD2500YS-18SHB0 | 20.06C06 | WD-WCANY2202967 | 1 |
Thanks in advance for advice!
speaktek
15 Posts
1
March 29th, 2012 06:00
I rebooted Server...and now OM shows online and healthy...go figure.
speaktek
15 Posts
0
March 29th, 2012 04:00
Also...this is the error I get in OM:
The following error has occurred: Disk rebuild failed
The error may have occurred due to the following reasons:
- Multiple users are logged into this system and conflicting commands were received
- A hardware change was detected which prevents this command from being completed
- The controller is in a state which prevents this command from being completed
speaktek
15 Posts
0
March 29th, 2012 06:00
Update: The two LEDs on the new drive match the others (Top=On Solid / Lower blinks with data). It seems normalized...but OpenManage still shows OFFLINE?
alcaide
2 Posts
0
April 4th, 2012 10:00
necesito informaciòn para conseguir una tarjeta controldadora hd para el modelo edge840 server
alcaide
2 Posts
0
April 4th, 2012 10:00
lo que necesito saber donde y cuanto vale dicha tarjeta, gracias por su atención