Start a Conversation

Unsolved

This post is more than 5 years old

59613

April 15th, 2014 12:00

Poweredge T410 & perc h710p

This server was purchased stock without RAID.  I am trying to add RAID 5.

I have bought a PERC h710p controller and 2 more drives.  When my documentation stated that my chasis was pre-cabled - I thought that is what it meant but apparently that is not the case.  I believe I am missing a cable or two and possibly some other important pieces here.  :-)

Here is what I have:

- T420 
- perc h710p Raid Controller 1GB NV Cache DPN 07GcGT

What I need is:
- Installing RAID in your server for Dummies?  :-)
- What am I missing?  What are the connections?  The cables currently in the system will not plug in.
- Do I need more hardware or am I just missing a cable?

Attached is a picture of the server with card installed...

thanks!

2 Posts

April 15th, 2014 13:00

Realized I put T410 in the subject - meant T420.  I don't see a way to edit the post... sorry about that.

2 Posts

March 24th, 2015 22:00

From my unsuccessful attempt, the X394K cable actually doesn't appear to be the right one. It has a 12-pin "P3A" power cable that the T410 has nowhere to connect. I suspect that cable is for the R410 only. See here:

en.community.dell.com/.../20745642

112 Posts

March 25th, 2015 00:00

Since you do not have a backplane you will need 

Dell Part #  XP00F - ASSY,CBL,MB,HD,SAS A,R420/R320 - Mini SAS & ODD power cable, MB (SAS A) to HDD (used with cable HDD).

http://www.impactcomputers.com/xp00f.html

This cable will have connectors SAS/SATA and power connectors that plug straight into your hard drives

.

No Events found!

Top