Unsolved
1 Message
0
1634
R510 Raid Upgrade
I have a R510 that has the Model UCP-61 controller which from research says it is the PERC 6i. I am looking to upgrade the controller to support larger than 2TB drives. Can someone point me in the right direction for what controllers (part numbers) are a good replacement and what cables I may need to connect to the backplane?
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
February 14th, 2020 15:00
Hi,
The H700i is validated.
Ferdasyn
13 Posts
0
February 21st, 2020 07:00
1x8 System Requires:
H700 Card: CNXVV (512Mb), 39H7H (1GB)
SAS A Cable: Y673P
SAS B Cable: P744P
1x12 System Requires:
H700 Card: CNXVV (512Mb), 39H7H (1GB)
SAS A Cable: Y674P
SAS B Cable: P745P
Your existing RAID Battery and Battery Cable will connect to the new card.
GokhanAkyon
3 Posts
0
May 27th, 2021 14:00
hi
is there any other 16x scsi card to implement on r510?
Dell-DylanJ
4 Operator
4 Operator
•
2.9K Posts
0
May 27th, 2021 14:00
Hello,
The R510 has the controller options listed above, fibre channel cards, and SAS and iSCSI HBAs. There are the LSI2032 (x4) and the Emulex OCE10102IX-D (x8), but I don not see an x16 option.
Dell-DylanJ
4 Operator
4 Operator
•
2.9K Posts
0
May 27th, 2021 15:00
You can try it, but is neither validated nor supported. It may work, but there is nothing we can offer to support if it does not. The supported card nearest that is an Emulex 8x card.
GokhanAkyon
3 Posts
0
May 27th, 2021 15:00
Thanks for the response
But i mean that is there any 16x scsi card for storage?
GokhanAkyon
3 Posts
0
May 27th, 2021 15:00
for example if I buy this card or another 16x, can I implement it to r510?
https://www.ebay.com/itm/311428121977