Unsolved
This post is more than 5 years old
29 Posts
0
6253
SAS 6/ir caching change
Hello
I need to change the caching mode on two old R200's to write through. Some older threads suggest using the RAID Storage Manager GUI. Does that still apply or can I do it with OMSA now?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 16th, 2014 06:00
Kschyff,
The SAS 6/ir is an entry level card for when you require basic RAID functionality,without the performance benefits of cache or a battery backup. So you won't be able to adjust the cache settings. . If the controller was a Perc 6/i then you would be able to adjust the cache settings.
Hope this helps