Unsolved
This post is more than 5 years old
1 Message
0
16525
SAS Raid On PowerEdge R210 !
Hello,
I have PowerEdge R210 Server and it has 2 HD of 250 GB each with SAS Raid Configuration.
Since the disk space is too low, I need to remove this Raid configuration and Add a single HD of 1 TB.
How can I delete the current Raid configuration and Add the new HD and install the new OS?
Kindly support me a.s.a.p.
Thanks/
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
October 12th, 2013 14:00
Hello asimpervaz
You will need to boot into the controller BIOS(CTL R) or use OpenManage Server Administrator to delete the array. Then you will either need to create a single drive RAID 0 or set the drive to non-RAID if your controller supports that function.
Thanks