Hi Tom,

The easiest way to do the update is to reboot and go to the lifecycle controller by pressing F10 during post. In there you can choose platform updates and it will connect to our FTP and update the firmware with the latest version.

What if you can't get into the LifeCycle Controller? It will not allow me to use F10 and the iDRAC will not start. This is causing the fans to run at extremely high RPMs and is very loud. I've read that if the firmware on different hardware is not up to date it can cause these issues and I've also read some people say that it is a faulty motherboard causing the issue.....

Is there a way for users to update the PERC H310 firmware without an iDRAC or lifecycle?

I have a PERC H310 in my Precision T7600.

Eh gov'na?

Charles,

I do not have the answer to your question, but it might help to post this in the Fixed Workstation forum. The Precision T7600 is not a server.

https://www.dell.com/community/Precision-Fixed-Workstations/bd-p/Precision-Fixed-Workstations?ref=lithium_menu

Also, I see that there is downloadable firmware for the H310 on the T7600 Drivers page.

https://www.dell.com/support/home/us/en/04/product-support/product/precision-t7600/drivers

Randy