Start a Conversation

Solved!

Go to Solution

1 Rookie

 • 

6 Posts

4139

March 18th, 2021 21:00

Upgrading R710 with SSD

hi everyone, 

wanting to know what are the SSDs can upgrade R710 server with 
have two options, 

1. Populating all bays with 256GB SSD
2. Populating all bays with 512GB SSD

can i get confirmation on this and if can get a compatible HDD part number would be great. 

 

Moderator

 • 

790 Posts

March 19th, 2021 03:00

Hi sajithk.

 

Here is a list of supported SSDs:

 

Part Number Functional Description
24XV8 SSD, 200GB, SATA, 2.5 inch, Height 15mm, Multi-Level Cell, Samsung
6K55X SSD, 200GB, SAS, 2.5 inch, Height 15mm, 512MB, Single Level Cell, Toshiba, (Phoenix)
6P5GN SSD, 200GB, SATA, 2.5 inch, Height 7mm, Multi-Level Cell, Intel
6R5R8 SSD, 200GB, SAS, 2.5 inch, Height 15mm, Sandisk, (Enterprise Class)
6XJ05 SSD, 400GB, SATA, 2.5 inch, Height 7mm, Multi-Level Cell, Intel, (Taylorsville)
8C38W SSD, 400GB, SAS, 2.5 inch, Height 15mm, Sandisk Corp, (Enterprise Class)
9T0ND SSD, 800GB, SATA, 2.5 inch, Height 7mm, Multi-Level Cell, Intel
DPF1J SSD, 800GB, SAS, 2.5 inch, Height 15mm, Sandisk, (Enterprise Class)
G613R 100GB SSD-SATA, 2.5, Samsung SS805
G914J 50GB SSD-SATA, 2.5, Samsung (SATA Chip Set Only)
H540J 25GB SSD-SATA, 2.5, Samsung (SATA Chip Set Only)
MCCKT SSD, 600GB, SATA, 2.5 inch, Height 7mm, Intel
MT7K5 SSD, 300GB, SATA, 2.5 inch, Height 7mm, 16MB, Intel
NND24 SSDR, 480GB, SATA, 3Gbps, 2.5", 512e, MU, ISE, Intel, Youngsville Refresh S4610, Enterprise Class
R0KXM SSD, 100GB, SATA, 2.5 inch, Height 7mm, Multi-Level Cell, Intel
R1PY5 SSDR, 240GB, SATA, 3Gbps, 2.5", 512e, MU, ISE, Intel, Youngsville Refresh S4610, Enterprise Class
R2PJ7 SSD, 400GB, SAS, 2.5 inch, Height 15mm, 512MB, Single Level Cell, Toshiba, (Phoenix)
TMC3T SSD, 160GB, SATA, 2.5 inch, Height 8mm, 16MB, Intel
X1MCH 150GB SSD-SAS, 2.5, Pliant
Y949P 50GB SSD-SATA, 2.5, Samsung SS805
Y9N83 SSDR, 960GB, SATA, 3Gbps, 2.5", 512e, MU, ISE, Intel, Youngsville Refresh S4610, Enterprise Class

 

Please make sure you have at least a PERC H200; PERC H700 or PERC H800 installed. These controllers are supporting SSDs.

 

BR
Stefan

 

1 Rookie

 • 

6 Posts

March 19th, 2021 19:00

thanks Stefan for the fully detailed reply. 

12 Posts

June 26th, 2023 20:00

Does this also apply to the R510 server ?      I have an R510 with original SAS drives.   I would like to replace all the drives with SAS SSD's.    Just a swap.   I have the H700 PERC controller.

Can I just replace the old spinning drives with SSD's  ?

Moderator

 • 

4.1K Posts

June 26th, 2023 21:00

Hello thanks for choosing Dell.
I'm afraid that is not possible.
When H700 RAID controller was released, there was no SSD SAS disks around.

No Events found!

Top