This post is more than 5 years old
15 Posts
0
191151
November 16th, 2014 02:00
ssd cashe on h730p
whether h730p supports ssd cache? how to the activated?
in t630 and Idrac 8, open manage essentials I cant found.
thank you
alex
No Events found!
This post is more than 5 years old
15 Posts
0
191151
November 16th, 2014 02:00
whether h730p supports ssd cache? how to the activated?
in t630 and Idrac 8, open manage essentials I cant found.
thank you
alex
Top
alekbo
15 Posts
0
November 16th, 2014 10:00
thx
which is the difference between H730 and h730p?
I ordered h730p because my ssd cache required
which solution I have to this problem?
alex
Daniel My
12 Elder
•
6.2K Posts
0
November 16th, 2014 09:00
Hello
Cachecade is not a feature of the 13th generation series 9 controllers. This feature has been deprecated for many reasons. One of the reasons is that it was not widely used, and it's functionality was very confusing for most people. The industry is also moving toward software defined storage that allows features with the same functionality as cachecade to be handled by software.
Thanks
alekbo
15 Posts
0
November 16th, 2014 10:00
you're right for SanDisk - it is not an option.
I'm surprised the options ssd cache is off because it brings many advantages.
I use it on other LSI RAID controller.
bad decision dell
thanks a lot
alekbo
15 Posts
0
November 16th, 2014 10:00
730 have same cache (1 or 2gb)
whether the SanDisk das cache solution?
there is a 90 day trial, how can I try it?
t630 has already arrived so I can not change the controller.
Daniel My
12 Elder
•
6.2K Posts
0
November 16th, 2014 10:00
I don't think we are talking about the same thing. A SanDisk Direct Attached Storage device would not be connected to the H730 controller. It would be connected via an external controller of some kind.
I'm not familiar with a Sandisk 90 day trial. If the trial is offered through us then contact your sales rep to request it. If it is offered through Sandisk then contact them.
Thanks
Daniel My
12 Elder
•
6.2K Posts
0
November 16th, 2014 10:00
The amount of cache.
If you need the cachecade feature then you will need to use one of our older PERCs like the H710. The feature sets between the two variations of our controllers are the same. The P version is a higher performance controller. It has more cache and will sometimes have a faster processor as well.
Thanks
Stephan-thevalley
2 Intern
•
130 Posts
0
November 18th, 2014 07:00
Is sandisk flashsoft included ?
If I read this review it looks like it's included :
www.storagereview.com/dell_poweredge_13g_r730xd_review
Daniel My
12 Elder
•
6.2K Posts
0
November 19th, 2014 10:00
The Sandisk DAS software that is referenced in that link is not included. It is an optional software purchase.
SanDisk DAS Cache is not hardware specific. It is a driver filter that redirects data read/write requests. It is an optional software purchase at point of sale. You will need to contact sales to discuss purchasing it after point of sale.
Thanks
alekbo
15 Posts
0
November 21st, 2014 04:00
However, I'm interested in hardware within the solution.
whether in t630 can instead h730p to put the previous generation RAID controllers that support ssd cache instance h710p or h720p?
whether the bios t630 and Idrac 8 enterprice see the controller at an appropriate manner and allow configuration?