This post is more than 5 years old
1 Rookie
•
1 Message
0
1985754
September 10th, 2014 00:00
Dell R720 iDRAC reset
Hi,
I encounter a small problem with a customer.
We have some Dell PowerEdge R710 and R720 servers used for ESXi Hypervisor, we use the iDRAC 7 for manage and monitor some parts of the server.
On three of them, we cannot access the iDRAC web interface, and i search a trick to reset the iDRAC.
We can to ping or access by SSH to the iDRAC ip address, but i cannot find the right SM-CLP command to reset only the iDRAC.
These servers is in production and we cannot shutdown them.
Thanks you for your return.
Best regards and sorry for my swiss english ;)
No Events found!
DELL-Bo Pham
2 Intern
•
261 Posts
0
September 10th, 2014 08:00
Hello,
Here are the commands to reset the iDRAC. Allow several minutes for the iDRAC to initialize before reconnecting.
Racadm racreset (soft Reset)
Racadm racresetcfg (Hard Reset - Resets IP/Account settings back to factory default)
Default IP > 192.168.0.120
Please let us know if you need any further info and we'll be glad to help.
RHCEv6
1 Message
0
October 20th, 2014 13:00
What RPM(s) are needed just to get this loocal drac/idrac admin tool on Dell 710 and 720 servers for RHEL5-64 and RHEL6-64?
DELL-Bo Pham
2 Intern
•
261 Posts
0
October 21st, 2014 09:00
Here is a helpful Linux repository page for installing OMSA 6.4. http://linux.dell.com/repo/hardware/latest/
Please review the wiki page ( http://linux.dell.com/wiki/index.php/Repository/OMSAfor additional info.
Alternatively you may also hold the i button on the LCD for 16 seconds until the iDRAC does a soft reset. This will not affect the server and only reboots the the iDRAC. It will take several minutes for the iDRAC to initialize before allowing you to reconnect.
nadogmoney
2 Intern
•
184 Posts
0
October 22nd, 2014 07:00
What firmware version is the idrac7? There are bad FW versions that will cause your initial issue again.