UNSOLVED
PowerEdge SC1420 proc upgrade possible?
I have a Dell PowerEdge SC1420 which supports 2 procs but currently has a single Xeon 3.0 GHz 1MB cache proc installed. It supports up to 12 GB of RAM if you max out 2GB in each of the 6 slots. Ideally, this would make for a nice little Windows Server 2008 Hyper-V server if the proc would have supported Intel Virtualization Technology, even though it does support the 64bit OS. The Xeon that is in there does not support VT!
My question is whether or not I can upgrade the proc to a Xeon Tulsa http://en.wikipedia.org/wiki/Xeon#7100-series_.22Tulsa.22 which is also a 800 MHz FSB / Socket 604 proc? This processor does support Intel Virtualization Technology and is 64bit compatible.
Anyone ever done this or have any guidance on this plan? If I do this...will the BIOS even recognize the VT upgrade?
Thx,
Gaylen
CANDYMANGANDY
17 Posts
937
0
Posted January 20th, 2011 04:00
I HAVE POWEREDGE SC1420 I UPGRADED TO 12GB RAM AND RAN INTO SOME PROBLEMS THE FIRST THRU FOURTH RAM SLOT 2R RAM
AND SLOT 5&6 MEMORY SLOT WILL ONLY SUPPORT 1R RAM
CANDYMANGANDY
17 Posts
937
0
Posted January 20th, 2011 05:00
I AN SORRY THE ONLY WAY YOU CAN GET TO 12 GB RAM IS IF YOU HAVE 2 PROCESSORS.
SINGLE CPU YOU MAY ONLY USE SLOTS 1,2 AND 5,6.
THE INFORMATION IS LOCATED ON THE INSIDE COVER, REALLY HAVE TO FOR THE INSTRUCTION ABOUT THE MEMORY
OPERATIONAL SYSTEM, WHAT EACH SLOT DOES
THE MOST YOU WILL BE ABLE TO PUT WILL BE 5-6GB
MULTI-ACTION MEMORY SLOTS 1-4
SINGLE-ACTION MEMORY 5-6
grant_stephenso
2 Posts
937
0
Posted March 5th, 2012 14:00
I was wondering if you ever tried this.. I have two cpu's but it does not let me run vmware workstation 8 becase of Intel Virtualization Technology and is 64bit compatible. anyone tried this?
TonyinBexhill
1 Rookie
•
4 Posts
937
0
Posted February 24th, 2010 05:00
Did you ever get a reply on this question. I have one CPU similaryl and I am very much interested in upgrading to 2 processors.