Unsolved
This post is more than 5 years old
1 Message
0
8523
Failed to install SLES 11 x86_64 on PowerEdge G11 r610/m610
There's a "kernel panic" occur when I install SLES 11 x86_64 on my PE M610 , and the same output when I install a PE R610:
CLIENT MAC ADDR: 00 22 19 D1 DE 0A GUID: 44454C4C 0000 1020 8020 80C04F202020
t
CLIENT IP: 10.1.1.61 MASK: 255.255.255.0 DHCP IP: 10.1.1.2
GATEWAY IP: 10.1.1.2
PXELINUX 3.62 2008-03-01 Copyright (C) 1994-2008 H. Peter Anvin
UNDI data segment at: 00091AA0
UNDI data segment size: 5CF0
UNDI code segment at: 00097790 e B
UNDI code segment size: 6D50
PXE entry point found (we hope) at 9779:00DA
My IP address seems to be 0A01013D 10.1.1.61 P
ip=10.1.1.61:10.1.1.2:10.1.1.2:255.255.255.0 - -
TFTP prefix: 33 GB
Trying to load: pxelinux.cfg/44454c4c-0000-1020-8020-80c04f202020
Trying to load: pxelinux.cfg/01-00-22-19-d1-de-0a
Trying to load: pxelinux.cfg/0A01013D
boot:
Loading os_sles11_x86_64/vmlinuz...........................................
Loading
os_sles11_x86_64/initrd.img.............................................
................................................................................
................................................................................
................................................................................
..................................................ready.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.19-5-default (geeko@buildhost) (gcc version 4.3.2
[gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 S0
Command line: initrd=os_sles11_x86_64/initrd.img
autoyast=http://10.1.1.2/scali/netinstall/10.1.1.61 install=http://10.1.1.
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000003f699000 (usable)
BIOS-e820: 000000003f699000 - 000000003f6ad000 (reserved)
BIOS-e820: 000000003f6ad000 - 000000003f6af000 (usable)
BIOS-e820: 000000003f6af000 - 000000003f6ce000 (ACPI data)
BIOS-e820: 000000003f6ce000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
DMI 2.6 present.
last_pfn = 0x3f6af max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
last_map_addr: 3f6af000 end: 3f6af000
RAMDISK: 3e1ac000 - 3f66f850
ACPI: RSDP 000F17B0, 0024 (r2 DELL )
ACPI: XSDT 000F18B4, 009C (r1 DELL PE_SC3 1 DELL 1)
ACPI: FACP 3F6C3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1)
ACPI: DSDT 3F6AF000, 2E76 (r1 DELL PE_SC3 1 INTL 20050624)
ACPI: FACS 3F6C6000, 0040
ACPI: APIC 3F6C3478, 015E (r1 DELL PE_SC3 1 DELL 1)
ACPI: SPCR 3F6C35D8, 0050 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HPET 3F6C362C, 0038 (r1 DELL PE_SC3 1 DELL 1)
ACPI: DMAR 3F6C3668, 01D0 (r1 DELL PE_SC3 1 DELL 1)
ACPI: MCFG 3F6C38C4, 003C (r1 DELL PE_SC3 1 DELL 1)
ACPI: WD__ 3F6C3904, 0134 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SLIC 3F6C3A3C, 0176 (r1 DELL PE_SC3 1 DELL 1)
ACPI: ERST 3F6B1FF8, 0210 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HEST 3F6B2208, 027C (r1 DELL PE_SC3 1 DELL 1)
ACPI: BERT 3F6B1E78, 0030 (r1 DELL PE_SC3 1 DELL 1)
ACPI: EINJ 3F6B1EA8, 0150 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SRAT 3F6C3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1)
ACPI: TCPA 3F6C3F34, 0064 (r2 DELL PE_SC3 1 DELL 1)
ACPI: SSDT 3F6C7000, 0754 (r1 INTEL PPM RCM 80000001 INTL 20061109)
Setting APIC routing to cluster x2apic.
SRAT: PXM 1 -> APIC 16 -> Node 0
SRAT: PXM 1 -> APIC 20 -> Node 0
SRAT: Node 0 PXM 1 0-40000000
Bootmem setup node 0 0000000000000000-000000003f6af000
NODE_DATA [0000000000009000 - 0000000000020fff]
bootmap [0000000000021000 - 0000000000028ed7] pages 8
(6 early reservations) ==> bootmem [0000000000 - 003f6af000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000bc98b8] TEXT DATA BSS ==> [0000200000 - 0000bc98b8]
#3 [003e1ac000 - 003f66f850] RAMDISK ==> [003e1ac000 - 003f66f850]
#4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
#5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000fe710] 000fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x0003f699
0: 0x0003f6ad -> 0x0003f6af
ACPI: PM-Timer IO Port: 0x808
Setting APIC routing to cluster x2apic.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 32 CPUs, 30 hotplug CPUs
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000003f699000 - 000000003f6ad000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 61344 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 252976
Policy zone: DMA32
Kernel command line: initrd=os_sles11_x86_64/initrd.img
autoyast=http://10.1.1.2/scali/netinstall/10.1.1.61 install=http://
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1861.992 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Checking aperture...
No AGP bridge found
Memory: 988520k/1039036k available (2699k kernel code, 50052k reserved, 3164k
data, 788k init)
Calibrating delay loop (skipped), value calculated using timer frequency..
3723.98 BogoMIPS (lpj=7447968)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[7]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[14]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[21]: defcmd archkdbcommon "" "Common arch debugging"
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
BUG: unable to handle kernel paging request at ffffffffa07129b0
IP: [ ] init_intel+0xea/0x14b
PGD 203067 *** 207063 PMD 0
Oops: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Supported: Yes
Pid: 0, comm: swapper Not tainted 2.6.27.19-5-default #1
RIP: 0010:[ ] [ ] init_intel+0xea/0x14b
RSP: 0018:ffffffff80965f48 EFLAGS: 00010202
RAX: 0000000010000000 RBX: 0000000000000000 RCX: 00000000000001a0
RDX: ffffffff808cbd14 RSI: 0000000000000046 RDI: 0000000010000000
RBP: 0000000010000000 R08: 0000000000000000 R09: 000000000000000a
R10: ffff8800000bc6a0 R11: ffffffff802223f1 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff80a40080(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffffa07129b0 CR3: 0000000000201000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff80964000, task ffffffff806da380)
Stack: 0000000100000001 0000000200000000 ffffffff808cbd00 ffffe20000000000
0000007800000000 ffffffff804943ef 0000000000000000 ffffffff80974fda
0000000000000000 ffffffff8096de10 0000000000000000 ffffffff809a1510
Call Trace:
[ ] identify_cpu+0x3c/0xa3
[ ] check_bugs+0x9/0x2e
[ ] start_kernel+0x313/0x324
[ ] x86_64_start_kernel+0xde/0xe4
Code: 0f a2 a8 1f 74 07 c1 e8 1a ff c0 eb 05 b8 01 00 00 00 66 89 85 d8 00 00
00 65 44 8b 24 25 24 00 00 00 e8 c3 66 d8 ff
RIP [ ] init_intel+0xea/0x14b
RSP
CR2: ffffffffa07129b0
---[ end trace 4eaa2a86a8e2da22 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
------------[ cut here ]------------
WARNING: at kernel/smp.c:331 smp_call_function_mask+0x32/0x1ec()
Modules linked in:
Supported: Yes
Pid: 0, comm: swapper Tainted: G D 2.6.27.19-5-default #1
Call Trace:
[ ] show_trace_log_lvl+0x41/0x58
[ ] dump_stack+0x69/0x6f
[ ] warn_on_slowpath+0x51/0x77
[ ] smp_call_function_mask+0x32/0x1ec
[ ] smp_call_function+0x29/0x2e
[ ] native_smp_send_stop+0x1a/0x26
[ ] panic+0xbc/0x169
[ ] do_exit+0x67/0x325
[ ] oops_begin+0x0/0x90
[ ] do_page_fault+0x625/0x6f5
[ ] error_exit+0x0/0x51
[ ] init_intel+0xea/0x14b
[ ] identify_cpu+0x3c/0xa3
[ ] check_bugs+0x9/0x2e
[ ] start_kernel+0x313/0x324
[ ] x86_64_start_kernel+0xde/0xe4
---[ end trace 4eaa2a86a8e2da22 ]---
It seems that the CPU can not be recognized in 64bit SLES 11's kernel,
but it's OK in 32bit SLES11.
Can you help me?