This post is more than 5 years old
47 Posts
0
23932
Intel DDIO. R320 - is it enabled?
Intel says that DDIO is enabled by default but I just want to know if it is supported in R320 G12.
If I buy R320 with E5-2420 and X540DP will I get direct cache IO with Intel DDIO using W2008R2 ?
Any other information on the subject will be appreciated too.
DELL-Geoff P
990 Posts
1
June 11th, 2012 10:00
The Broadcom LOM or cards will write straight through as well. Per Intel, all I/O devices are supported.
Regards,
DELL-Geoff P
990 Posts
1
June 11th, 2012 10:00
Good morning.
Here is a link from Intel:
http://www.intel.com/content/www/us/en/io/direct-data-i-o.html
Intel Data Direct I/O Technology requires no industry enabling
Intel DDIO is enabled by default on all Intel Xeon processor E5 platforms. Intel DDIO has no hardware dependencies and is invisible to software, requiring no changes to drivers, operating systems, hypervisors, or applications. All I/O devices benefit from Intel DDIO, including Ethernet, InfiniBand*, Fibre Channel, and RAID.
The R320 will support it.
Regards,
maxima120
47 Posts
0
June 11th, 2012 10:00
Thank you very much
maxima120
47 Posts
0
June 11th, 2012 10:00
Thank you Geoff.. Could you please elaborate - when you said all IO devices. Does that mean even Broadcom LOM will write straight to the CPU cache?