Unsolved
This post is more than 5 years old
1 Message
0
5669
MEMBIST failure - The following DIM has been disabled by BIOS
Please help!
I replaced the RAM, PROCESSOR and HARD DRIVE on my Dell Poweredge R710 but when the server is booting this error "MEMBIST failure - The following DIM has been disabled by BIOS)" message comes up about the RAM.
Any advise will be appreciated.
Thanks.
bradthetechnut
6 Professor
6 Professor
•
7.4K Posts
0
May 14th, 2018 23:00
This way your post will be answered in a much more timely manner.
moontide
1 Message
0
November 16th, 2020 23:00
My ram detected. The ram works. It was in this system.
Now one is dropped. A1.
Might have to do with mirrored in bios. Might be I didn't look at memory config placement in manual. Maybe Dell is silly particular. I'm working with a r710. Its a dell. Its particular most likely.
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
November 17th, 2020 07:00
Hello @moontide,
Sorry I don't quite understand your message. Are you in need for help?
Regards.