PE 2650 BugCheck 0x0000000a

I have 2 Power Edge 2650's with a three drive RAID configuration and 4GB of Memeory, I am running Windows 2003 Standard Server that came from Dell Installed, purchased back in November/December.

I have called Dell no less the five times on this very same issue and they have been no help what so ever, I even flat lined the box and reloaded from the provided Dell CD's and the same problem still exitst.

I still have a service call open with them and they have not called back for status even thou I told them the problem is not fixed, they did come and replaced everything in the machine except the power supplies and it still reboots.

I did find one interesting thing however, if I unplug one of the two power supplies it will boot up and not reboot? I am not sure why this is, I called Dell and told them this and they tell me its a software issue still and that I have a courpt OS! OKAY?  so what, are you telling me is the factory install disks are courpt?

You know when I purchased the Gold service contract I was expecting much more then this for my money.

I am going to call Dell again Monday and see if I can get any help, but I expect I will get the same old c.r.a.p.

I would bypass Dell all together and call Microsoft directly. They will own the issue till resolution.

I was also having the same issues and after analyzing the memory.dmp file I concluded it was the racser.sys that was causing the problem.  i then sent the files to MS and they said the same thing.  I have disabled the RAC in the BIOS and uninstalled the RAC software, I dont use it anayway.  So far no crashes.  I have over 200 of these 2650's and it was only happening on a handfull of servers.

 

rob

Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL)
The Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL) occurs in Windows XP, Vista and Windows 7. This error normally occurs in the following format.
STOP 0x0000000A (0xBFD14AAC, 0x000000FF, 0x00000000, 0x8000F67C)
IRQL_NOT_LESS_OR_EQUAL

Cause:

There are several causes behind this error that is listed below:

1. During installation of software or driver that attempts to access in kernel mode to touch pageable memory at too high a process IRQL (Internal Request Level).
2. Occurs when driver uses incorrect memory address.
3. Incompatible or outdated driver
4. Hardware problems
5. Incompatible or corrupted software

Resolution:

In order to fix Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL), you need to correct several bugs in your PC. The step by step fixing guide are given below that will help you to fix Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL) error.

1. If this error occurs immediately after installation of software or driver then surely it is occurring due to installed software or driver. Start your PC in safe mode and uninstall the application and driver.

2. If this error is occurring while installing windows XP, Vista or Windows 7 then probably there is some hardware problem. Might by hardware is not supporting windows or memory availability is too short. See the system requirements before installing windows operating system.

3. Incompatible or outdated driver is the most prominent reason behind this error. An incompatible driver either uses incorrect memory addresses or changes values of other installed software. Check and update all your driver to fix Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL) problems.

http://www.deskdecode.com/how-to-fix-stop-0x0000000a-irql_-not_-less_-than_-equal/