Unsolved
This post is more than 5 years old
1 Message
0
264091
PowerEdge 2950 E171F PCIE Fatal Err B0 D6 F0
My dell poweredge server gives me an error of E171F PCIE Fatal Err B0 D6 F0. Cannot find a solution for this. I will appreciate any help figuring out how to solve this problem.
dell-richard g
605 Posts
0
November 10th, 2006 18:00
peter-t
3 Posts
0
August 27th, 2009 09:00
Hello Richard,
I have a 2950 with the same issue. Did you ever locate a solution for this problem. We have 2 Telephone interface cards installed in our 2950. One is a Sangoma 4 Port Analog (FXO) card. The other is a one port PRI (T1) Interface.
Thanks,
Peter T.
reybeast1
347 Posts
0
August 27th, 2009 15:00
Do you only get the failure when both cards are installed? Have you tried running only one card at a time?
peter-t
3 Posts
0
August 27th, 2009 15:00
Thanks for te reply. Never had only 1 card installed -- will check that out and get back here. FYI - this message stopped appearing for a while, not sure exactly how long. I just noticed it again yesterday.
peter-t
3 Posts
0
August 27th, 2009 16:00
also, additional error data from display:
E1711 PCI PERR B14 D0 F2
AXI
54 Posts
0
September 11th, 2009 08:00
try updating the drivers and firmware for those cards
olsj87
1 Message
0
October 9th, 2013 00:00
Also try replacing the board or if you can solder simply replace the capacitors.