Unsolved
This post is more than 5 years old
1 Message
0
531
T610 Raid 0 OS install problems
I'm trying to install server 2008 r2 on my t610 I press f10 to use the unfied server configurator but It keeps saying that is missing the Operating System List
I try to update the platform but I keep getting a message about not being able to download updates because they are not signed by Dell or something.
I'm running out of options and I feel like I have a very expensive paper weight. Any help is deeply appreciated.
Thanks
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
April 14th, 2017 14:00
Skip USC/LCC then. It is not necessary, and I never use it for OS installs.
Install directly from the Windows media. You will need to install drivers after install, and if using the PERC H700, H200, or S300 controllers you will need to provide drivers for them during the install, but that is easy enough. Drivers for the PERC 6/i and SAS 6/iR should be built in. If using the S100 onboard controller, TURN IT OFF, and use the embedded SATA non-RAID option.
I would STRONGLY recommend against a RAID 0, unless you only have a single disk.