HDD Firmware update WD2004FBYZ

Firmware Update für WD2004FBYZ von D3N3 nach D3N4 schlägt fehl:

www.dell.com/.../DriversDetails

"The operation failed due to an invalid image file."

System:
- PowerEdge R530
- PERC H330 Mini, FW: 25.5.3.0005, Treiber: 06.904.09.00
- 3x WD2004FBYZ, Raid-1 mit dediziertem Hotspare
- SLES12 SP2

./Serial-ATA_Firmware_XTHKJ_LN_D3N4_A00.BIN

Update Package 16.06.001 (BLD_1048)
Copyright (c) 2003 Dell, Inc. All Rights Reserved.
Release Title:
WesternDigital D3N4 for model number(s) WD1004FBYZ and WD2004FBYZ., A00

.
.
.
.

Collecting inventory...
....
Running validation...

WD2004FBYZ

The version of this Update Package is newer than the currently installed version.
Software application name: Firmware for - Disk 1 in Backplane 1 of PERC H330 Mini Controller 0
FQDD: Disk.Bay.1:Enclosure.Internal.1:RAID.Integrated.1-1
 Package version: D3N4
Installed version: D3N3

WD2004FBYZ

The version of this Update Package is newer than the currently installed version.
Software application name: Firmware for - Disk 3 in Backplane 1 of PERC H330 Mini Controller 0
FQDD: Disk.Bay.3:Enclosure.Internal.1:RAID.Integrated.1-1
 Package version: D3N4
Installed version: D3N3

WD2004FBYZ

The version of this Update Package is newer than the currently installed version.
Software application name: Firmware for - Disk 5 in Backplane 1 of PERC H330 Mini Controller 0
FQDD: Disk.Bay.5:Enclosure.Internal.1:RAID.Integrated.1-1
 Package version: D3N4
Installed version: D3N3



Continue? Y/N:Executing update...
WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE IS IN PROGRESS.
THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
........
Device: WD2004FBYZ
  Application: Firmware for - Disk 1 in Backplane 1 of PERC H330 Mini Controller 0
  The operation failed due to an invalid image file.

Device: WD2004FBYZ
  Application: Firmware for - Disk 3 in Backplane 1 of PERC H330 Mini Controller 0
  The operation failed due to an invalid image file.

Device: WD2004FBYZ
  Application: Firmware for - Disk 5 in Backplane 1 of PERC H330 Mini Controller 0
  The operation failed due to an invalid image file.

Was läuft hier schief?