This post is more than 5 years old
11 Posts
0
2330
Powerpath communication with esx server
Hi,
in our environment we need to specify all traffic on the firewall between subnets. I was not able to find which tcp/udp ports are required to communicate between the host that has the powerpath rpowermt tools and the esx servers.
Can anyone point me to a port list?
we use powerpath/ve 5.8, esx 5.1
Thank you very much
Simon
Kecheng
19 Posts
0
March 4th, 2014 21:00
The port should be TCP 5989. While I run rpowermt command, only this port can be monitored as “ESTABLISHED” as below:
C:\>netstat -ano | find "192.168.100.101"
TCP 192.168.100.100:49186 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49189 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49192 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49195 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49198 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49201 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49204 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49220 192.168.100.101:5989 TIME_WAIT 0
TCP 192.168.100.100:49223 192.168.100.101:5989 ESTABLISHED 10024
TCP 192.168.100.100:65298 192.168.100.101:22 TIME_WAIT 0
simon czechner
11 Posts
0
March 5th, 2014 03:00
Hi KC,
yes i agree. I had a netmonitor running while opening the rpowermt command and i see consistently this port used with any command issued.
Thank you for taking your time.
I am wondering why this is not documented in the product pdfs
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 9th, 2014 08:00
Hi, wanted to mention that TCP is now included in the PowerPath/VE 5.8 and 5.9 installation and administration guides available on EMC Online Support: TCP port for vSphere host and rpowermt server is 5989.