Unsolved
This post is more than 5 years old
5 Posts
0
3926
Powerpath does not see HW path and I/O path
Here is the partial output I see when I run the powermt display dev=all command
Pseudo name=emcpowerd
Symmetrix ID=000xxxxxxxx
Logical device ID=0A3B
state=alive; policy=SymmOpt; priority=0; queued-IOs=1;
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
7 UNKNOWN unknown FA 7eA active alive 0 0
7 UNKNOWN unknown FA 8eA active alive 1 0
8 UNKNOWN unknown FA 10eA active alive 0 0
8 UNKNOWN unknown FA 9eA active alive 0 0
This is a VMAX device mounted on a RHEL host.
Any ideas as to why this is happening. The device is working perfectly. It is in production....
How can I rectify this issue and make powerpath show me the paths.
Brion2
154 Posts
1
September 2nd, 2011 06:00
Hi. Were you running the powermt display with the "every" option?
Can you try running "powermt restore" and "powermt config"?
Thanks, Brion
Brion2
154 Posts
0
September 2nd, 2011 08:00
Also,what is the exact OS version?
Pramod_EMC
5 Posts
0
September 2nd, 2011 09:00
The OS on this server is Linux 2.6.18 and I ran the powermt display dev=all command and pasted the info of the device that has issue.
I tried powermt config, restore, check, save and all I can think of....
Nothing worked to fix this...
Brion2
154 Posts
1
September 2nd, 2011 11:00
It looks like more indepth troubleshooting is necessary. Please open a case with CS.
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
September 2nd, 2011 16:00
I had a similar scenario with hp-ux 11.23 and Vmax. But running discovery(ioscan , isnf) and power path commands got it working. You may have to do the equivalent commands in Linux, twise
Hopefully it come up
Pramod_EMC
5 Posts
0
September 6th, 2011 11:00
I talked to the CS and they want me to reboot the system.... (I am going to try this option in the next few days and will update you guys on the status)
Scanned for new devices multiple times... Always comes with a message, no changes found
Pramod_EMC
5 Posts
0
September 14th, 2011 12:00
Reboot fixed the problem.... There was an underlying host issue.
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
September 15th, 2011 18:00
what host issue?
Pramod_EMC
5 Posts
0
September 19th, 2011 15:00
OS crashed when they tried to reboot the server