Unsolved
This post is more than 5 years old
21 Posts
0
13956
adding second controller to md3200i
i have a md3200i with a single controller. i would like to add a second controller. how would i configure it? plug and play?
Unsolved
This post is more than 5 years old
21 Posts
0
13956
i have a md3200i with a single controller. i would like to add a second controller. how would i configure it? plug and play?
Top
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
April 6th, 2016 15:00
Hello Bagek,
Here is a link to the Simplex to Duplex mode guide that will walk you through adding a second controller. downloads.dell.com/.../powervault-md3200_user%27s%20guide3_en-us.pdf
Please let us know if you have any other questions.
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
April 6th, 2016 15:00
Hello Bagek,
Here is a link to the Simplex to Duplex mode guide that will walk you through adding a second controller. http://downloads.dell.com/manuals/common/powervault-md3200_user%27s%20guide3_en-us.pdf
Please let us know if you have any other questions.
Rody1717
9 Posts
0
November 16th, 2016 01:00
Hello,
i have the same problem, i have an empty place for the second controler ...
The link describe for add for a new enclosure, it is the same method to add a second controler?
thanks
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
November 17th, 2016 11:00
Hello Rody1717,
If you are running your MD3200i in simplex mode then all you need to do is to add the controller and follow the steps listed in the link. If you don’t have any expansion enclosure attached to your MD3200i then you don’t need to be worried about that part.
Please let us know if you have any other questions.
errd
1 Message
0
November 30th, 2016 08:00
Hello Sam,
Would this be the same procedure done if a second controller failed on MD3200i and I replaced it with the same model?