Unsolved
This post is more than 5 years old
2 Posts
0
1041
AMD FirePro S10000 not detected in Dell R7910
Hello,
I have a Dell R7910. I installed a AMD FirePro S10000 Passive GPU at Riser 3 and found the computer does not detect the card under device manager.
The video was provided by embedded video controller via VGA. I tried disabling the controller and use the GPU to provide video via DVI. There was no video out.
The card is confirmed to be working by installing in a T7910. Any thoughts are appreciated.
Dell R7910
Windows 8.1 Pro
E5 2603 V3
8GB DDR 4 RAM
Regards
Felix
I have a Dell R7910. I installed a AMD FirePro S10000 Passive GPU at Riser 3 and found the computer does not detect the card under device manager.
The video was provided by embedded video controller via VGA. I tried disabling the controller and use the GPU to provide video via DVI. There was no video out.
The card is confirmed to be working by installing in a T7910. Any thoughts are appreciated.
Dell R7910
Windows 8.1 Pro
E5 2603 V3
8GB DDR 4 RAM
Regards
Felix
DELL-Alasdair R
4 Operator
4 Operator
•
754 Posts
0
January 22nd, 2018 08:00
Can you try removing the riser and putting the GPU directly into the PCIe slot?
Can you check in the iDRAC and see if there are any errors or information relating to the GPU? Does it seem to getting powered ok?
Thanks