Unsolved
This post is more than 5 years old
36 Posts
0
5249
Dell 2145cn MFP web-interface issue
Hello,
I am trying to activate the following check box in the web based configuration of the 2145cn multifunction printer:
Machine Settings > E-mail Setup > SMPT Client Setup > File Format Setup Prompt : ( Always prompt for file format setup before scanning?)
I can check the box and click "Apply", but the printer always 'forgets' the setting.
I tested using Firefox 3.0.13 as well as Explorer 8.
desmet
36 Posts
0
September 24th, 2009 05:00
I hate to bump my own posts, but could someone pass this to the firmware developers so they can correct it?
It's a real nuisance to always have to manually change the default file format when someone wants to scan a
JPEG instead of a PDF.
llynster
1.7K Posts
0
September 24th, 2009 11:00
Interesting..... let's take this one step farther. I setup a 2145 on my office lab network and noted that when I accessed the page you provided, the check-box was already checked. BUT, once I unchecked the box, I found I could not get the box re-checked.
I'll pass this on up thru my company channels so they can pass it on to Dell to get fixed. Don't hold your breath...... these things take awhile.
llynster
1.7K Posts
0
September 24th, 2009 13:00
GOOD CATCH !!
I've already received a "Thank you for your feedback" email...... let's see how far it goes.
desmet
36 Posts
0
September 24th, 2009 13:00
Thanks a lot for doing the experiment, llynster. I hope this will eventually reach the persons who can fix it...