Unsolved
This post is more than 5 years old
4 Posts
0
5770
Printer 924 problems; Please help to fix.
Just got the 924 printer and it was working fine , now when I want to print The paper gets jamed and will not print. I tried to unplug everything and hold down the power button , but this did not work. When I try to print the paper will not go through the feeder. It gets stuck and the paper is all wrinkled up. I need to have this fixed because I have school and I need the printer.
william_the_sco
1.4K Posts
0
January 29th, 2006 21:00
The type of paper that you use can make a difference. It depend on the stiffness and tooth of he paper. On my 922, good paper or better such as G/P from Walmart for around $3.00 per ream works fine but $1.00 or so per ream from close out discount stores jams almost every sheet. If you are using paper different than has been working for you, that may be the problem.
The pressure guide on the left side of the paper feed tray must stay snug against the paper.
Over loading the paper tray.
Fanning the paper too much in the tray.
Small piece of paper left in the printer after the first jam.
An object which has fallen into the top of the printer.
Look into the printer before removing the jammed paper to try to see where it is jamming.
baybeegirl
4 Posts
0
January 30th, 2006 16:00
rissa1018
39 Posts
0
January 31st, 2006 03:00
baybeegirl
4 Posts
0
February 1st, 2006 15:00
rissa1018
39 Posts
0
February 2nd, 2006 02:00
Jillze
3 Posts
0
February 7th, 2006 11:00
johnetta
3 Posts
0
March 21st, 2006 18:00
buzzingtalk
3 Posts
0
March 26th, 2006 21:00
johnetta
3 Posts
0
March 28th, 2006 02:00
mi nombre
2 Posts
0
May 25th, 2006 03:00
rissa1018
39 Posts
0
May 30th, 2006 14:00
cathy0606
2 Posts
0
October 23rd, 2006 14:00
mi nombre
2 Posts
0
October 23rd, 2006 16:00