Highlighted
tedrich
Copper

Install CD-ROM drive in Dell Precision 380 Workstation

I need visual instructions for installing a new CD-ROM drive in a Dell Precision 380 Workstation... can't find anything online and can't figure out the chassis puzzle for removing the drive bay faceplate, and insterting the drive.
0 Kudos
4 Replies
cmath
Copper

Re: Install CD-ROM drive in Dell Precision 380 Workstation

I could really use an illustrated guide as well....
0 Kudos
klcl
Bronze

Re: Install CD-ROM drive in Dell Precision 380 Workstation

DOn't have a visual guide but this should help:

Open the computer case by removing side panel (as shown in Quick reference guide)

Remove the front silver bezel by pulling up on the blue plastic release lever (located just below the CRROM drive cage and in front of the large CPU cooling fan) and at the same time pulling up the silver bezel.

Remove the second black bezel holding the cdroms in place by pushing down (in direction of arrow) on the blue plastic release device located on the cdrom drive cage.

Then remove the one or two screws holding the cdrom in place and slide the CDROM out the front of computer case.

Hope this helps. Let me know.
0 Kudos
ledpham
Copper

Re: Install CD-ROM drive in Dell Precision 380 Workstation

The illustrations are in the  User's guide. They are quite good, but you have to download the document.

<ADMIN NOTE: Broken link has been removed from this post by Dell>

good luck!
0 Kudos
hstaples
Copper

Re: Install CD-ROM drive in Dell Precision 380 Workstation

Hi, I hope you can help me. I am trying to convert my 380 from dekstop to tower config. Can I use the same black drive bezel to use as tower ?

 

Thanks,

 

  Harvey.

0 Kudos