Unsolved
This post is more than 5 years old
6 Posts
0
17643
February 3rd, 2009 07:00
Roxio Creator Plus - Dell Edition
When I 'Enable' DLA, as one has to do to burn or erase, there are no problems until I eject the disk. Then I get a blue error screen and have to shut down and restart the computer. This does not happen if DLA is disabled. I have tried three DVD/CD drives and it happens with all three.
Any suggestions as to how to remedy this problem?
No Events found!
fireberd
9 Legend
•
33.4K Posts
0
February 3rd, 2009 15:00
This won't fix the DLA problem, however Packet Writing (DLA) and RW media are both the most unreliable method of CD burning. If it's worth burning to a CD, use a CD-R and the regular "create a data CD" function in Roxio.
RW media has a long history of losing data and/or format. If you haven't been "bitten" by the problem, you will sooner or later.
One other issue with Packet Writing programs, you can only have one packet writing program installed. Packet writing programs are, Sonic DLA, Roxio Drag to Disc and Nero InCD. Also there have been issues with the built in Windows CD burning and packet writing programs, if the Windows CD burning is not disabled.