Unsolved
This post is more than 5 years old
2 Posts
0
13898
5100MP VGA out port issues
We run a signal from one 5100mp to another 5100mp through the VGA out port. We have done this for a long time without issue. Now, there are a lot of tiny horizontal lines, and the color is off, eg.- the white is now pink on the screen. We have tried different VGA cables, so we know it's not the cables. If you have any thoughts please share them.
Runtime467
2 Posts
0
September 27th, 2012 14:00
Just to be clarify, the issue is with the projector that the is receiving the line out. The projector that is giving the line out, the picture is fine, the issue seems to be just with the vga out port itself.
DELL-Nikhil D1
4 Operator
4 Operator
•
2.6K Posts
0
September 28th, 2012 00:00
Hi Runtime467,
Try changing the graphic card output signal, if graphic card output signal is sync on Green, and to change the display VGA at 60Hz signal, please go into OSD select Management, follow the below steps to change the signal type:
If the problem persists run the Self-diagnostic test for preliminary diagnostic on image color problem.
Follow the below mentioned steps:
Please reply for further help.