Unsolved
This post is more than 5 years old
2 Posts
0
9173
Dell 5100MP DLP Projector MENU button not working or locked out
Hi,
I am trying to enter the menu of the projector by pressing the menu button on the projector control panel but nothing comes up. I even held it for 15 and more seconds per manual but no luck. Any ideas? Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 13th, 2016 02:00
I have the same problem.
ilov2xlr8
2 Posts
1
April 13th, 2016 04:00
In my case it turned out to be the ribbon cable that goes to the control board with the buttons.
There is a ribbon cable between the LCD/Control panel and the main circuit board. I disconnected it, cleaned it, and reconnected it. Problem solved!
This also got rid of another issue: at every power up the LAMP and TEMP LEDs would illuminate and the LCD would read SW Upgrade. The only way around that was to unplug the cord. After re-seating the ribbon cable this went away as well!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 13th, 2016 05:00
test test test