2 Posts
0
296
Me4012 iscsi with r450 server
Is it possible to add 2 iscsi initiators to r450 servers via direct connection without switch from me4012 storage.
The ports given from the controllers to the server are not up, can you help me?
2 Posts
0
296
Is it possible to add 2 iscsi initiators to r450 servers via direct connection without switch from me4012 storage.
The ports given from the controllers to the server are not up, can you help me?
Top
DellEMCSupport
Moderator
Moderator
•
631 Posts
0
November 28th, 2022 08:00
Hello Ratheesh.Chandran,
You do not have to use a switch. This resource can guide you : Deployment guide
https://dell.to/3OFFjra
Page 26-28
iSCSI protocol
The 10 GbE iSCSI ports are used for:
Connecting to 10 GbE iSCSI hosts directly, or through a switch used for the 10 GbE iSCSI traffic
page 40
Configure iSCSI ports
Configuring a Windows host with iSCSI network adapters page 47
Ratheesh.Chandran
2 Posts
0
November 29th, 2022 01:00
Thanks to your valuable guidance, I was able to use it effectively
Thank you.