Unsolved
This post is more than 5 years old
1 Message
0
2085
March 15th, 2019 04:00
how to configure "C0, Diskless Configuration" on R7415
Hi All,
I am trying to config a diskless R7415 or R7425, but the configurator is not allowing me to, and I don't know why.
I'm testing with the R7415 with 3.5" Chassis with up to 8 Hot Plug Hard Drives for SOFTWARE RAID. When I select "C0, diskless configuration" a warning appears saying: "Diskless Configuration requires No Hard Drives and No OS, No Utility Partition.". However, I cannot unselect the harddrives, and there is only option "no operating system"
My guess is there is an other config option that requires the utility partition. Any ideas?
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
March 15th, 2019 09:00
Hello
The configurator varies by region. I was able to reproduce this issue with the United Kingdom selected.
There is a rule conflict. All configurations require at least one drive per backplane, the diskless configuration option requires no disks be present in the system. It does not appear this configuration can be processed online. You will need to order through a sales representative. Also, I don't show diskless is an option on the R7425.
Thanks