DeafFrog
2 Bronze

Create report for luns alloacted to server and those in Cgs

Hi ,greetings !!

We hv sun server in cluster in one site and at site 2 , we have standalone sun machine.Luns are from Vnx ,one at each of these site and being replicated as CGS in RecoverPoint.

From RP you can export report of rsets in CG ,but once i have got a neat lun Wwn report which has following header

Clu.Serv1 Clu.Serv2 Dr.Srv1 LunId Rset CG.Name

How can i create a similar report spanning storage lun Wwn from both side ,lun id , Rset and cg name

I know you can export from Rset tab for a Cg ,but that won't list storage lun wwns

Thanks ,rt.

0 Kudos
3 Replies
forshr
4 Beryllium

Re: Create report for luns alloacted to server and those in Cgs

Take a look at the output from save_settings. Export it use the plink command:

plink -ssh x.x.x.x (where x.x.x.x. is the Cluster IP address) -l admin -pw admin save_settings > save_settings.txt

Regards,

Rich

DeafFrog
2 Bronze

Re: Create report for luns alloacted to server and those in Cgs

Thankyou Rich for the reply , it was helpful.

0 Kudos
Smithina
2 Bronze

Re: Create report for luns alloacted to server and those in Cgs

hirt1980 wrote:

Hi ,greetings !!

We hv sun server in cluster in one site and at site 2 , we have standalone sun machine.Luns are from Vnx ,one at each of these site and being replicated as CGS in RecoverPoint.

From RP you can export report of rsets in CG ,but once i have got a neat lun Wwn  report which has following header

Clu.Serv1  Clu.Serv2 Dr.Srv1 LunId Rset CG.Name

How can i create a similar report spanning storage lun Wwn from both side ,lun id , Rset and cg name

I know you can export from Rset tab for a Cg ,but that won't list storage lun wwns

Thanks ,rt.

Hi did you get any proper solution, I am getting the same issue.

0 Kudos