Unsolved
This post is more than 5 years old
64 Posts
0
2935
RecoverPoint/SE upgrade using Deployment manager
I am trying to upgrade recoverpoint which is at version 3.5 sp1 to 4.0 using deployment manager. but it fails with comment "system failed to verify fake wwns were done correctly"
Could any of you please elaborate on how WWN spoofing is done when we replace an RPA? and how can I find out if its done correctly
nasiamohamedull
64 Posts
0
January 11th, 2016 12:00
Resolved error by copying configuration from one of the RPAs to the rest .
forshr
1.1K Posts
0
January 11th, 2016 14:00
Faking the WWNs simply maintains the previous RPA HBA info on the new RPA via a linked file.
You can turn this check off via the relevant parameter in the DM config file.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
Idan
675 Posts
0
January 11th, 2016 14:00
Hi,
You're getting this error since at one time, 1 RPA or more were replaced and the spoofing option (keeping the WWNs of the filed RPA) was selected.
To workaround this error, which means that the spoofing information wasn't synced between all RPAs, you would need to add the WWN details to all RPAs in the cluster, via boxmgmt.
Also, make sure to go to RP 3.5.2 before going to 4.0.2.2.
Regards,
Idan Kentor
RecoverPoint Corporate Systems Engineering
forshr
1.1K Posts
0
May 16th, 2016 09:00
Go to your DM directory and find the conf sub-directory. You will find the ndu.properties file. Open it and do a find for WWN. You will find a parameter called SHOULD_FAIL_ON_FAKE_WWNS_CHECK. Set this to false and then restart DM to perform the upgrade.
Regards,
Rich
nasiamohamedull
64 Posts
0
May 16th, 2016 09:00
So I cannot directly goto 4.0?
TS-Jang
5 Posts
0
September 17th, 2018 20:00
forshr
1.1K Posts
0
September 18th, 2018 13:00
Please submit an SR for this issue.
Rgds,
Rich
TS-Jang
5 Posts
0
September 19th, 2018 22:00
Please explain in detail.
forshr
1.1K Posts
0
September 20th, 2018 10:00
Open a Service Request as there is a known issue which requires assistance from Support.
Regards,
Rich