This post is more than 5 years old
28 Posts
0
1494
RecoverPoint multi site configuration
Hello,
It is possible to connect three RPA clusters on three different sites?, as the following image shows:
All RPAs clusters are running version 4.0
We want to replicate LUNs on the following way:
SITE A -> SITE B
SITE A -> SITE C
SITE B -> SITE A
SITE B -> SITE C
SITE C -> SITE A
SITE C -> SITE B
Anybody has implemented a similar configuration?
If this is not possible, another option could be the following:
SITE A -> SITE B
SITE A -> SITE C
SITE B -> SITE A
SITE C -> SITE A
Any suggestions are welcome.
Thank you!
forshr
1.1K Posts
0
October 16th, 2013 03:00
Hi Jorge,
Perfectly acceptable configuration from an inter RP cluster and CG replication perspective. As long as there is a replication pathway (IP or FC) between each of the RP clusters, effectively forming a fully meshed RP system, then the CG relationships that you have highlighted can be created.
Regards,
Richard
PaLo
28 Posts
0
October 16th, 2013 07:00
Very useful,
Thank you!!!
AndMar2
11 Posts
0
August 30th, 2018 12:00
Hi,
would be great to understand if you realized the relationship with different CGs or with multiple Repl-Set into same CG.
I'm looking some info to deploy a Y topology:
A to B
A to C
What I'm not able to find-out is how to design CG/Repl-Sets in order to failover, in case of DR, on a specific site (B or C) depending on my needs to protecte same production volumes.
What is the best option to have it done?
If 2, can I specify how to failover on a specific volume instead of the other one with SRM as Orchestrator?
Any help will be appreciated
Thank you
AndMar
forshr
1.1K Posts
1
August 30th, 2018 13:00
Multi-copy is common place. They key aspect of the relationship is to remember that the source volume(s) can only reside in a single CG.
Regards,
Rich