Unsolved
This post is more than 5 years old
2K Posts
0
986
Firewall ports and encryption level
Where do I get the information on which firewall ports are required to be open for Replistor between source and target servers and also is data encrypted while travelling? If yes, what is the level of encryption supported?
yito1
262 Posts
0
November 25th, 2010 20:00
Hi,
What is information that you want it?
Is it a port of RepliStor?
You can set the encryption level at client option.
Connection --- challenge-response algorithm
Integrity --- 16-byte signature
Encrypted --- Encrypted
jschrade1
106 Posts
0
November 26th, 2010 11:00
RepliStor uses ports 7144 and 7145. Both TCP and UDP should be open for RepliStor to communicate and discover other RepliStor servers. Encryption is done using the Windows encryption via OS API calls. Logon credentials between RepliStor consoles can be changed from the default Windows NTLM validation to Kerberos via the GUI.
Regarding the ports, RepliStor will open and send hand shaking on the above ports, however the response may be on any port that the OS uses for the response. So, you may see outgoing communication being sent only on the above ports but a reply may show up on other ports. That is governed by the OS, not RepliStor.
The ports used can be changed via the RepliStor GUI. The above ports are the default settings.