Unsolved
This post is more than 5 years old
83 Posts
0
654
re-install the operating system
hi ,all:
Node A failure, automatically relocate to Node B, if the node A re-install the operating system have been, and how to fix it?
Resources group could not take offline.
thanks.
100x
83 Posts
0
December 3rd, 2009 01:00
when i reinstall AutoStart,to rejoining it to the existing Autostart domain,
The right steps are delete the existing data source and recreate the Mirror data source ?the source is node B ?
tribicic
157 Posts
0
December 3rd, 2009 01:00
tribicic
157 Posts
0
December 3rd, 2009 02:00
Yes, first add the node to the domain, verify that the configuration is ok as far as the nodes go, and the take offline the resource group, delete the mirror data source from the resource group configuration, delete the data source, and create it again. Since the valid data at this moment is on node B you will select node B as the source node.
Then add the data source to the resource group (make sure the position in the startup and shutdown sequence is correct), and that bring online the resource group on node B. At this point the data source should start the initial sync, and until it is completed it will stay in warning state but you should see the percentage progress mark.
Once it syncs you can do a failback again (if the application or service is configured properly on the reinstalled node).