This post is more than 5 years old
1 Message
0
529
How to use the two data network card to transfer data in scaleio1.32
In my system there are four network cards, two as a business and management network。
I want to use the other two network cards as Scaleio data network. But after several tests ScaleIO uses only one card to transfer data.
How to configure to make two network card at the same time to transmit data
alexkh
60 Posts
0
June 29th, 2015 07:00
While installing ScaleIO, you probably provided only one IP from each server, therefor only one NIC is being used.
You can add more IPs accosted with more NICs from each server, by using the command scli --add_sds_ip
PowerFlex Mark
40 Posts
0
June 29th, 2015 04:00
Hi,
There is a detailed section in the ScaleIO User Guide and install guide, which covers all aspects of Networking. There is also a Fine Tuning document which covers this topic.
Hope this helps,
BR
Mark