Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
1
1784
Solaris unable to discover the LUNs presented through VPLEX
Hi,
I have presented the LUNs to solaris through VPLEX. But the problem is on the host LUN is shown as "not available".
Then I have cleared the dead paths from power path and rediscovered but now the LUN is shown as "unknown".
What do i need to do to bring the LUN active?
This is the error i am getting:
AVAILABLE DISK SELECTIONS:
0. c0t0d0
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0
/pci@1f,4000/scsi@3/sd@1,0
2. c2t0d0
/pci@1f,4000/lpfc@4/sd@0,0
3. c2t0d2
/pci@1f,4000/lpfc@4/sd@0,2
4. c2t1d0
/pci@1f,4000/lpfc@4/sd@1,0
5. c2t1d2
/pci@1f,4000/lpfc@4/sd@1,2
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
December 5th, 2012 12:00
ANd its not allowing me to mount..
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
December 5th, 2012 13:00
you need to post this question in VPLEX forum
https://community.emc.com/community/connect/vplex?view=discussions
BChused
69 Posts
0
December 5th, 2012 13:00
Is this question related to ESRS?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
December 5th, 2012 13:00
No, its related to LUN discovery in host through VPLEX