Unsolved
This post is more than 5 years old
5 Posts
0
1698
Cisco Nexus 7000 multiple VDC support
Hello,
Does Smarts IP Manager 9.2.2 supports Cisco Nexus 7000 multiple VDC support? If yes can someone share Cisco 7K side snmp configuration. I tried following configuration but it doesn't work:
vdc_id vdc_name | state | mac | type | lc |
------ -------- | ----- | ---------- | --------- ------ | |
1 | Nexus1 | active | 40:55:39:06:a1:c1 Admin | None |
2 | Nexus2 | active | 40:55:39:06:a1:c2 Ethernet | m1 f1 m1xl m2xl |
3 | Nexus3 | active | 40:55:39:06:a1:c3 Ethernet | f2e |
Nexus1# sh run snmp
!Command: show running-config snmp
!Time: Thu Sep 11 07:07:22 2014
version 6.2(8a)
power redundancy-mode ps-redundant
vrf context management
ip route 0.0.0.0/0 10.4.12.1
hardware forwarding unicast trace
interface mgmt0
speed 100
vrf member management
ip address 10.4.12.64/24
snmp-server host 10.4.5.13 traps version 2c public
snmp-server host 10.4.5.16 traps version 2c public
snmp-server enable traps snmp authentication
snmp-server context Nexus3
snmp-server context Nexus2
snmp-server community public group network-operator
Nexus1-Nexus3#
!Command: show running-config snmp
!Time: Thu Sep 11 07:08:03 2014
vrf context management
ip route 0.0.0.0/0 10.4.12.1
version 6.2(8a)
snmp-server host 10.4.5.13 traps version 2c public
snmp-server context Nexus3 vrf management
snmp-server community public group vdc-operator
Nexus1-Nexus2#
!Command: show running-config snmp
!Time: Thu Sep 11 07:08:38 2014
vrf context management
ip route 0.0.0.0/0 10.4.12.1
version 6.2(8a)
snmp-server host 10.4.5.13 traps version 2c public
snmp-server context Nexus2 vrf management
snmp-server community public group vdc-operator
Thanks
Niraj-Ionix
5 Posts
0
September 18th, 2014 12:00
As of 6.2(8a) Cisco do not support inter-communication of VDC's. Each VDC has to be managed by its own management IP address.