This post is more than 5 years old
20 Posts
0
1086
ICMPONLY dmctl command
Hi All,
I am trying to add ICMPONLY devices to SMARTS and was not sure how todo this using dmctl.
Any help would be much appreciated.
J
This post is more than 5 years old
20 Posts
0
1086
Hi All,
I am trying to add ICMPONLY devices to SMARTS and was not sure how todo this using dmctl.
Any help would be much appreciated.
J
Top
FredericMeunier_0588be
143 Posts
0
October 22nd, 2010 05:00
Hi,
loot at the ICF_TopologyManager singleton :
ICF_TopologyManager::ICF-TopologyManager
and use the addPending method :
addPending( , "", , 'TM_EXTERNAL', 'TM_NONSNMP', 161, "ICMPONLY" )
then start the discovery:
discoverPending();
HTH,
--Fred
== APG5 ReportPack4Event for Smarts can report on millions of notifications in seconds ==
Frederic Meunier
Solutions Watch4Net Inc
APG & Smarts InCharge integration
http://www.watch4net.com
VipinParambath
14 Posts
0
October 22nd, 2010 05:00
Hi Savuka,
I have the information that the Access mode during discovery of specific host can be set to ICMPONLY with the below mentioned dmctl command
" dmctl -s 'server' invoke 'Class'::'Instance' setAccessMode ICMPONLY "
example : "dmctl -s invoke Host:ysdev30 setAccessMode ICMPONLY"
Hope this helps.
Regards,
Vipin
savuka1
20 Posts
0
October 22nd, 2010 06:00
Hi
Thanks Frederic
That is what I though, but did not have the syntax correctly defined
The other thing that also needs to be configured is the discovery.conf file in the local directory and the below option needs to be set to true
ShowPendingNONSNMP
Thanks
J